there are six sets of 15kg power hammers for UK dealer, and the 4 sets of 25kgs. they will be shipped full container.
and many orders for USA, Norway, France, and Australia etc buyers are in producing.
Why is the pneumatic hammer the most suitable tool for forging?
Pneumatic hammer is forging machines composed of a rigid frame, an anvil, and a reciprocating ram equipped with a hammerhead or upper die. During operation, the billet is positioned on the lower anvil or die, while the ram repeatedly delivers controlled impacts to deform the material until the desired shape is achieved. This process enables the production of complex forged components, such as hubs, rings, and other precision-shaped parts.
Unlike a simple drop hammer, a typical pneumatic hammer does not rely solely on the gravitational force of a falling mass. Instead, it stores potential energy through mechanisms such as mechanical linkages and springs, compressed air, or steam, and then releases this energy during the forging stroke. This stored energy significantly increases the impact force and allows the hammer to deform the billet more efficiently, achieving greater shaping capability and improved control over the forging process.
we also can supply lathes to cut the forging blanks.
Pneumatic Forging Hammer (Self-Contained) for Blacksmithing
Pneumatic Forging Hammer offering blacksmiths a versatile and powerful solution for shaping metal
In the evolving world of blacksmithing, the integration of modern technology with traditional craftsmanship has given rise to innovative tools that enhance efficiency, precision, and productivity. One such groundbreaking tool is the Self-Contained Pneumatic Forging Hammer. This advanced piece of equipment represents a significant leap from traditional forging methods, offering blacksmiths a versatile and powerful solution for shaping metal.
Self-Contained Hammer delivers consistent, controlled strikes
This type of power hammer delivers consistent, controlled strikes, making it an indispensable asset in both small-scale workshops and large industrial settings. Unlike its predecessors, which rely on manual force or external power sources, this hammer incorporates an integrated pneumatic system that delivers steady, adjustable force tailored to the specific needs of the project at hand.
Key features of the Pneumatic Hammer include:
- Integrated Air Compressor: Eliminating the need for external air lines, the built-in compressor provides immediate and uninterrupted power, enhancing mobility and reducing setup time.
- Adjustable Strike Force: Blacksmiths can easily modify the intensity of the hammer’s blows, allowing for precise control over the forging process.
- Ergonomic Design: Designed with user comfort in mind, the hammer reduces physical strain, enabling longer working sessions without fatigue.
- Durability and Reliability: Constructed with high-quality materials, the hammer is built to withstand the rigors of continuous use, ensuring longevity and consistent performance.
Pneumatic Forging Hammer bridges the gap between tradition and innovation
By combining the raw power of pneumatics with the finesse required for intricate metalwork, the Self-Contained Hammer bridges the gap between tradition and innovation. It empowers blacksmiths to push the boundaries of their craft, creating intricate and robust metal pieces with unparalleled ease and efficiency. Whether you are a seasoned blacksmith or a budding artisan, this tool is poised to revolutionize your forging experience, making it an essential addition to any blacksmithing arsenal.
Anyang STP hydraulic press Price
Anyang ST hydraulic press for blacksmithing introduction
hydraulic press – Anyang STP series forging press driven by hydraulic station, and electrical controlling, includes 30 Ton and 50 Ton, specially designed for the blacksmith, bladesmith makes forging blank, punching. STP series press with powerful, controllable, and affordable, etc features. it’s a wonderful tool for bladesmiths to make knife blank to cooperate with STH power hammers or make punching.
Sale Price
STP-30 EXW price 4500USD
STP-50 EXW price 6800USD
STP SERIES HYDRAULIC PRESS ADVANTAGES:
- Pull-down design, low height and barycenter, very forging will be steady.
- Casting frame more muscular than fabricated ones.
- Less noise and vibration than the hammer.
- Easy control the forging size.
- Round guiding system – better ability and smaller gap.
- Simple controlling electric circuit, easy to settle the problem by yourself.
how to adjust the breaking current of power hammer
Different countries have different voltage standards,which results in different running current for motors of the same power. Anyang ST power hammer are equipped with motor circuit breakers – Schneider brand. This electrical component can not only control the start and stop of the motor, but also automatically cut off the circuit when the motor is running at overcurrent, thus protecting the motor.
We will adjust the safe current value according to the motor rated current when it leaves the factory, but due to work errors or unstable voltage, the running current of the motor will exceed the setting safe value, causing the motor to stop working and cannot be restarted immediately. If this happens, you need to make adjustments according to the following steps.
Step one – Open the switch box.
Step two – Check the setting value if meet the motor rated current, we suggest add 20%. because when the voltage not enough the motor running current will rise to meet up the total output power.
Step three – Open the cover glass.
Step four – set the right value.
Then, turn back to close the switch box.
3 phases motor running current: I = P / U * 1.3 (P: power, U: voltage)
Single phase motor running current: I = P / U *1.4 (P: power, U: voltage)
more product please visit new website: www.aymachinetools.com
Advantages of self-contained air hammer
self-contained air hammers are becoming increasingly popular due to their many advantages. These tools are driven by compressed air, and the air is stored in a self-contained unit within the hammer itself. The main advantage of self-contained air hammers is their convenience. Because they do not require an external compressor easy to install and move, and also save much place.
The self-contained air hammer is an indispensable tool for blacksmithing that offers numerous advantages. This powerful tool uses compressed air to drive the hammer, which makes it stronger, faster, and more efficient than traditional hammers. Here are some of the advantages of using a self-contained air hammer for blacksmithing:
- Increased Efficiency: Unlike traditional hammers that require a lot of physical effort, the self-contained air hammer requires less manual labor and delivers more powerful blows. This makes it a more efficient tool to use for forging and shaping metal.
- Greater Precision: The self-contained air hammer gives you better control and precision than traditional hammers. It allows you to adjust the speed and force of the hammer to suit the task at hand, making it easier to work on intricate or delicate pieces.
- Consistency: The self-contained air hammer is capable of delivering consistent blows, making it easier to achieve uniform shapes and sizes in your work. You can also use it to repeat shapes and patterns with ease for mass production work.
- Reduced Fatigue: Since the self-contained air hammer requires less physical effort, it can help reduce fatigue and wrist strain. This allows you to work longer hours without suffering from muscle fatigue.
- Versatility: Self-contained air hammers are capable of handling a wide range of tasks, from heavy forging to delicate chiseling. This makes it a versatile tool for blacksmithing that can adapt to various applications.
- Safer Operation: Finally, self-contained air hammers are safer to use than traditional hammers. You can work with greater precision and control, reducing the risk of accidents and injuries compared to using sledgehammers or manual chisels.
In summary, the self-contained air hammer greatly enhances the workflow and safety for blacksmithing projects. It can provide greater precision, consistency, and versatility which allows blacksmiths to deliver projects with greater efficiency.
please click the link to learn more about the self-contained power hammer.
